Order by 11:00 and it rides today's truck · Fresno & Clovis dailyCounter open · 5889 E Clinton AveTeam login
MARCOINDUSTRY SUPPLIES · FRESNO

Carpet Pre-Sprays · updated 2026-09

Dilution ratios, explained once — with a calculator

What 1:32 actually means, how to mix into a sprayer or a truckmount, and why most callbacks are a dilution problem.

Dilution calculator

3.9 oz concentrate + 124.1 oz water

= 3.9 oz per gallon.

Every chemical on the wall has a ratio on the label, and the counter answers more questions about that number than about anything else. Here is the whole thing.

What the ratio means

A ratio of 1:32 means one part concentrate to thirty-two parts water. It does not mean one part in thirty-two total. So for a gallon of ready-to-use solution (128 ounces), 1:32 is 128 ÷ 33 ≈ 3.9 ounces of concentrate and the rest water. The difference between ÷32 and ÷33 is small at 1:32 and enormous at 1:4, which is why the calculator above does the math.

A lot of labels also give ounces per gallon, which is the same idea stated the easy way. 4 ounces per gallon is 1:32. 2 ounces per gallon is 1:64. 1 ounce per gallon is 1:128. If you remember that 128 ounces are in a gallon, you can convert anything.

Sprayer vs. truckmount

For a pump-up sprayer you are mixing ready-to-use solution: measure the concentrate into the sprayer, fill to the line with water. For a truckmount you are usually mixing a concentrate that the machine dilutes again at the metering valve — so the label gives a mix ratio for the jug on the truck and a metering setting, and both matter. If the label says 1:8 in the jug and the machine meters at 1:8, the carpet sees roughly 1:64. Get the jug ratio wrong and the machine multiplies the error.

Why it goes wrong

Under-dilution — too strong — is the common one. It feels like it should clean better. What it actually does is leave residue that attracts soil, so the carpet looks great on the day and grey in three weeks, and the customer calls. It also costs money: a crew running pre-spray at 1:16 instead of 1:32 is buying twice the chemical for a worse result. Over-dilution is rarer and shows up as a job that just did not clean.

The fix is boring: a measuring cup on every truck, the ratio written on the jug in marker, and the same person mixing every morning. The supplies aisle has the cups.

  • Hot water changes things. Most pre-sprays are rated at a specific temperature; running hotter lets you run leaner.
  • Hard water eats surfactant. Fresno and Tulare County water is hard, and some products want a slightly stronger mix here than the label written for soft-water markets suggests. Ask the counter for the local adjustment on a specific product.
  • Never mix two concentrates in the same sprayer. Some combinations neutralize each other; a few gas off.

More from the counter