Janitorial Supplies · updated 2026-10
Setting par levels in the janitorial closet
How a property manager or contractor works out reorder points for tissue, towels, liners, soap and disinfectant, and how a route truck changes the numbers.
Nobody notices a janitorial closet until something runs out. The first sign is a roll of tissue on a stall floor, then a note on the door, then a phone call to someone who has to make a run. A par level is a simple fix. It is the amount of each item you want on the shelf at the start of the week, and the amount at which you reorder.
This guide is for a property manager running a building, or a custodial contractor running several. The math is the same.
Par and reorder point
Two numbers per item. The par level is the maximum you keep on hand. The reorder point is the quantity at which you place an order. The gap between them is what you use while you wait for the order to arrive.
If you use 6 cases of liners a month, and your orders take a week to arrive, you use about a case and a half in the time it takes. Your reorder point has to be larger than that, with a cushion. Your par is the reorder point plus the amount you actually want to buy at a time.
- Par = reorder point + order quantity.
- Reorder point = usage during lead time + safety stock.
- Safety stock = a cushion for a busy week, a late truck, or a building event.
Count first, then guess
The best data is yours. For four weeks, count what you put on the shelf and what is left at the end of each week. That gives you weekly usage for each item in your own building. Four weeks is enough to smooth out a busy week and a quiet one. If you can do more, do it, especially if your building has a seasonal swing, such as a school with a summer break or an office that fills up after a holiday.
If you cannot wait for four weeks of data, estimate from headcount, and then adjust with your own counts as they come in.
Consumption by headcount, at a general level
Usage scales with people. Restrooms drive tissue, towels and soap, so the question is how many people use them and for how long. A building with a cafeteria or kitchen adds liners, towels and degreaser. A building with children adds soap and paper towels and more of every one of them.
- Tissue and towels: usage is roughly proportional to headcount times the number of days in the building. A school that has a thousand students and staff uses far more than a thousand-square-foot office with six people, and a busy public restroom uses more than a staff-only restroom.
- Hand soap: it follows the same curve, and it depends on the dispenser. A dispenser that delivers a measured dose uses less than one that lets a person pump as much as they like.
- Liners: usage is the number of cans times the number of times each can is emptied. A restroom can may be changed every day, a desk-side can every week.
- Disinfectant and cleaners: usage follows the cleaning schedule. Measure the number of bottles or gallons used per week, and divide by the number of rooms, to get a rate you can scale.
A worked example, with made-up numbers, so you can see the shape. Say a building with 50 people goes through 4 cases of towels over 8 weeks. That is half a case a week. If the building doubles in headcount, expect to double. If you receive a delivery every two weeks, you need at least one case on hand at the start of each cycle, plus a cushion. Your reorder point is a case and a half, and your par is two and a half. Run the same thinking for each item, then adjust after the next month of counts.
Standardize the dispensers
The cheapest way to cut down on the number of different things in the closet is to standardize the dispensers. If every restroom in your buildings takes the same roll of tissue, the same towel, and the same soap cartridge, you stock one of each. If every building has a different dispenser, you stock three kinds of tissue and two kinds of towel, and every one of them has its own par level.
Tork and Kimberly-Clark paper products are on the Janitorial aisle, along with dispensers, and the product page lists which dispenser takes which roll or fold. Before you buy a dispenser, check the refill that goes in it. Before you buy a refill, check the dispenser it goes in. A match between the two is more important than a small price difference.
- Choose one roll tissue, one folded or roll towel, and one soap format.
- Label the shelf with the item and the par level.
- Replace old dispensers when you can, so a building with five types becomes a building with one.
Pick a format, then size the pack
A case of tissue in large rolls lasts longer in a restroom than a case in standard rolls, which affects how often someone has to refill. But large rolls need a dispenser that fits them. Liners are sized to the can, and the guide on can liner sizing shows how to measure. The best par system is simple enough that a new employee can run it the first week.
What the truck route changes
How often the truck comes sets how much you must stock. If you can get an order the next day, you can carry a small shelf. If the truck only comes once a week, you need a week of stock at all times, plus a cushion.
Our own truck runs fixed route days. Fresno, Clovis, Sanger and Fowler get a delivery every weekday. Selma, Kingsburg, Dinuba, Reedley, Visalia, Tulare and Hanford are on Tuesdays and Thursdays, and Madera is on Wednesdays. An order in by 11:00 AM goes on the next route day. Deliveries on the route are free over $150, and $15 under.
What that means for your par levels:
- Weekday route towns: you can run a lean closet, because the lead time is a day. A reorder point of a few days of use is enough.
- Twice-a-week towns: your lead time is up to three or four days, so the reorder point should cover about that, plus a cushion.
- Once-a-week towns: stock a full week plus the cushion, and plan the order to land before the shelf runs down.
- Everywhere else, orders ship UPS Ground, so build in a few more days of lead time.
Review every quarter
Par levels are not permanent. A building gets a new tenant, a school adds a classroom, a kitchen closes. Every quarter, look at your numbers and compare them with usage. If you are running out between deliveries, raise the reorder point. If the closet is full of product that is not moving, lower the par. Write the new numbers on the shelf.
A final thought on shelf space. A closet holds only so much, and a par level has to fit. If your par does not fit on the shelf, the answer is a more frequent delivery, not a bigger closet. Our accounts let you save a standing list, keep a card on file, and add the people who are allowed to order, so a closet check on Monday turns into an order that is on the truck on Tuesday.